White's Bullseye II PinPointer probe
Whites Bullseye II pinpoint probe
The White’s 120mm pinpoint probe is designed to be used as an aid to target location, as well as for locating wall studs and other near surface metals. A probe can help pinpoint a target in a hole, which has been dug smaller than the detectors coil. A useful tool to have on you when detecting as it will save time and energy digging more.
When working in a muddy field with any pinpoint probe, put it in a plastic see through bag and tie an elastic band around it. This will keep it clean and save the job of cleaning the probe after use. When detecting a target, use the probe as you would your detectors search coil by crisscrossing over the potential target.The target illumination light is automatically activated when the probe is switched on. This will help the user to see into dark holes and identify objects in poor light conditions. Detection area on probe is along the entire length of the probe area.
- Two operating modes: audio tone & vibration
- Waterproof 120mm probe with 2 full collar supports
- Super bright LED light Target sensitivity control
- Tough, double sealed on/off membrane switch
- Easy access battery door, (Battery supplied)
- Rugged high impact case